How To Frost Garage Door Windows

• How To's & Quick Tips

iii Easy Ways Y'all Can Add Privacy to Glass

Itching for a dwelling house update? Here's an like shooting fish in a barrel one: Frost window or drinking glass door for a luxe expect and more than privacy. There's more than than one way to go about it, so choose your favorite arroyo.

Photo: shutterstock.com

More than than a mere decorative cease, frosted glass as well offers a practical benefit: Without blocking the passage of low-cal, it adds privacy to windows or doors that would otherwise be transparent. While professionals frost glass through sandblasting, a do-it-yourself can accomplish the aforementioned effect with one of three basic methods.

Photo: nyshower.com

SPRAY Pigment

Believe it or non, yous can frost glass with a special type of spray paint. Rust-Oleum manufacturers a popular, readily available product along these lines, which you can buy on Amazon or option up at your local home improvement retail center.

Applying the terminate is easy. Here's how information technology'southward done:

1. Clean the glass throughly and tape off the window or door frame.
2. Apply a thin coat of the spray paint and permit it dry.
3. Apply additional coats, if you wish for neat opacity.

If you lot go tired of the expect, information technology'due south no problem: The finish tin be removed with a drinking glass scraper. Beingness that the spray paint comes at a low cost, it'south worth a shot if you want to frost drinking glass in your home.

WINDOW FILM

You tin can too frost glass by means of window motion-picture show, which is non-adhesive and works via static cling. That ways it's forgiving: If you don't go the application precisely right on the get-go endeavor, you can start over pretty easily.

1. Get-go, thoroughly launder the surface to exist frosted, using glass cleaner and a lint-free textile.
2. Adjacent, combine water with a couple drops of dish detergent in a spray bottle.
3. Then proceed to lightly spritz the glass before applying the window moving picture.
4. As y'all go, remove air bubbles with a squeegee.

ETCHING

A permanently frosted effect may be achieved through the use of a drinking glass-carving cream. Though you've probably never heard of such products, crafters love them. Armour Etch glass etching cream leads the pack in popularity (view on Amazon).

If you lot choose to go this route, take intendance in applying the cream and closely follow the instructions printed on the package. Basically, the process involves the following:

1. Mask off sensitive areas with painter's tape.
2. Use a bristled brush to scrub the cream onto the glass.
3. Let the etching cream sit for a period of time stipulated by the manufacturer.
4. Rinse off the cream with warm water.

Suddenly—and somewhat magically—there will be etched glass where at that place was formerly a traditional clear pane.

Source: https://www.bobvila.com/articles/how-to-frost-glass/

Posted by: trosclairunflithen.blogspot.com

Share this post