How To Remove Double Hung Windows

Information technology's like shooting fish in a barrel to remove and reinsert your double hung window sash. Take a look at this video that outlines the steps. You can follow forth with the instructions beneath as you watch the video, or print them out for futurity reference.

How to Remove a Double Hung Window Sash

Step 1: To remove the lower sash, brainstorm by opening it. Lift upwardly on handle every bit pictured, or plough the spoon, depending on the window serial yous take. (Note: Some windows may accept a "window opening control device" that does non allow the window to be opened more than a few inches. If your window has that, printing it in to disable information technology.)

Step 2: Slide the lower sash upwardly 4 inches. Press both Tilt Latch Buttons that are on the meridian of the sash until they click. You'll find these at the left and right ends of the sash.

Step iii:Rotate the sash towards the inside of your domicile until it is perpendicular to the wall. Elevator upwardly on i side 2 inches and so the other side. Brand certain the pivot bars are not continued to the balance shoes and rotate the window out of the frame.

Step 4: Once the lower sash is removed, you tin can proceed with the upper sash. Slide the upper sash downwardly until it is about six inches higher than the window sill. Press both Tilt Latch Buttons that are on the meridian of the sash until they click and repeat step 3.

How to Reinstall a Double Hung Window Sash

Step 1: To reinstall the sashes, brainstorm with the upper sash first. Hold it perpendicular to the wall. Place ane pin bar into the inner rest shoe and so do the other side. Brand sure the pivot bars are fully seated into the shoes on both sides and give them a piffling pat to secure them in place. This volition help avoid any potential damage to the window before proceeding to the adjacent pace.

Step 2: Rotate the sash upward to make sure i side does not drib. Push the sash until it contacts the frame fully to engage the tilt latches. To ensure information technology is inserted correctly, try to pull information technology abroad from the frame just a little with a tug forrad. It won't pull abroad if the tilt latches are engaged correctly. If they are not engaged correctly, push the sash again until information technology does contact the frame.

Step iii: Slide the upper sash up and down to check the total range of motion.

Footstep 4: Now it's time to supervene upon the lower sash. Begin by holding information technology perpendicular to the wall. Follow the aforementioned process you did in step i when you reinstalled the upper sash. Keep to step 2. If you cannot get the tilt latches to engage correctly, telephone call one-800-Milgard for service.

Step 5: Slide the lower sash up and down to check the full range of motion. Check the performance of the handle or spoon to make sure the hardware has engaged. If information technology has non engaged, make sure the upper sash is all the style upwardly and the lower sash is all the manner down.

You tin can discover more than "How To Videos" on milgard.com.

Source: https://www.milgard.com/blog/how-remove-and-reinsert-double-hung-window-sash

Posted by: trosclairunflithen.blogspot.com

Share this post